2304043 Minn Kota PowerDrive 12 Volt V1 Control Board Upgrade
The 2304043 control board and the 1866040 foot pedal for the 2001 to 2007 PowerDrive 12 volt models has been discontinued by Minn Kota but you can upgrade to the PowerDrive V2 control board. By upgrading to the V2 control board you can either upgrade your foot pedal (your existing V1 foot pedal will not work with the V2 control board), add CoPilot or add iPilot to your trolling motor. For more information please call/text Lakeside Marine and Service at 815 246 2535.
This kit will replace the following control boards and foot pedals for 2001 to 2007 12 Volt PowerDrive Models:
Control boards: 2304043, 2304004, 2304014, 2304041
Foot Pedals: 2774700, 1866040, 2994700
WARRANTY/RETURN INFORMATION: All Minn Kota electrical items are tested first by the manufacturer and a second time before leaving our facility. Since they are tested twice, the chance of the items being inoperative is very unlikely. In the event that you have any questions regarding the installation of your item, please contact us before doing so. We do not accept returns on used/installed electrical items. If for some reason you do not need the part you've ordered, it must be returned as unused, uninstalled in the original package with all of the original contents.
Lakeside Marine & Service is a Minn Kota Authorized Service Center. We sell and service all Minn Kota Products & Parts. This Minn Kota Part is brand new directly from Minn Kota. If you have any questions or need helping finding parts please contact us.
Very good customer service and products, thank you for your help.
The original control board in my powerdrive stopped working when one of the electrolytic caps shorted. Control board was toast
This kit was a nice solution. I have a working trolling motor again for 1/4 the cost of new. Also the new foot control is a better design than the original
Possible improvement for this kit would be to include some replacement femal spade connectors for the power connections. Mine got toasted when the original control board burned up. I had to search for ones that worked with the 8 gauge wires and had high enough current capacity.
Although the instructions were a bit confusing, the connections and changes were relatively simple. Most of the issue revolved around identifying the component with its name and the location for the component. The pictures were fuzzy and nearly impossible to use. Most items were intuitive, so assembly is unlikely to go wrong, just took longer than it should.
It works perfectly and much less expensive than a new Terrova.
I added i-Pilot to a 20 year old PowerDrive v1. I don’t miss the foot pedal much. The gains of i-Pilot far outweigh having a foot pedal. Now I’m fishing more and don’t have to constantly control the boat. Best thing I ever purchased for my boat. I wish I did it sooner.
Parts for my Minn Kota arrived on time and worked great! back on the water now with no issues.